Moldurera 4 caras con jointers (60–80 m/min)

Leadermac Speedmac

Moldurera 4 caras de gama intermedia con jointers integrados y velocidades de avance de 60 a 80 m/min. Equilibrio entre productividad y costo operativo.

Solicitar Presupuesto (54) 11 4331-7334 / 5498

Asesoramiento técnico gratuito · Sin compromiso de compra

Ficha técnica

Especificaciones del fabricante

01Número de husillos/cabezales	2 to 11
02Working Width (with a tool cutting circle of 163mm)	20–230 mm (0.78"-9")
03Working Thickness (with a tool cutting circle of 163mm)	10–150 mm (0.39"-6")
04Basic Spindle Motor capacity - Wye-Delta (Soft Starts) on all motors	11/12 kW (15 HP)
05Diámetro de husillo	50 mm
06Velocidad de husillo	6000 rpm
07Tool cutting circle, First Bottom Spindle, min-max	125–200 mm (5"-7.8")
08Tool cutting circle, Vertical Spindles, min-max	140–250 mm (5.5"-9.8")

09Tool cutting circle, Horizontal Spindles, min-max	140--250 mm (5.5"-9.8")
10Motor de avance	11 kW / 15 HP / INVERTER
11Velocidad de avance (variador VFD)	6–60 m/min (20 / 200fpm)
12Ø rodillos superiores de entrada	205.36 mm (8")
13other Top Feed Rolls - Diameter	140 mm (5.5")
14Top Feed Roll Width - Multiple Rolls Stacked on each Top Roll Shaft	50 mm (2") / Roll
15Ancho de rodillo inferior	Full Width

01Presión neumática máx. rodillos	6 bar (85psi)
02Adjustment range for Infeed Table (Btm Head Cut) and Edge Jointing Fence	10 mm (.4")
03Ajuste axial husillos verticales	80 mm (3.2")
04Ajuste axial husillos horizontales	40 mm (1.6")
05Largo mesa de entrada	0.8M (32")
06Diameter of Dust Hoods for Vertical & Horizontal Spindles	Ø175 mm (6.9")
07Número de husillos/cabezales	Any Head Configuration - available
08Working Width (with a tool cutting circle of 163mm)	to 310 mm (12.2"), 330 mm (13")

09Working Thickness (with a tool cutting circle of 163mm)	to 6 mm (.25") to 200 (8")
10Basic Spindle Motor capacity - Wye-Delta (Soft Starts) on all motors	to 37.5 kW / 50 HP
11Diámetro de husillo	1 13/16" / 2 1/8"
12Velocidad de husillo	7200 / 8000 rpm
13Motor de avance	15 / 18.5 kW (20 / 25 HP / INVERTER)
14Velocidad de avance (variador VFD)	9–90m/min (30–300fpm)
15Largo mesa de entrada	1.4 / 2 / 2.5 / 3M (55" / 78" / 98" / 120")