Moldurera 4 caras de alta velocidad (80–150 m/min)

Leadermac Thundermac

Moldurera 4 caras con jointers integrados para velocidades de 80 a 150 m/min. Configurable con tools de aserrado y husillos adicionales según necesidad de producción.

Solicitar Presupuesto (54) 11 4331-7334 / 5498

Asesoramiento técnico gratuito · Sin compromiso de compra

Ficha técnica

Especificaciones del fabricante

01Número de husillos (mín–máx)	2 to 11
02Ancho de trabajo (cabezal Ø163 mm)	20–230 mm (0.78"~9.1")
03Espesor de trabajo (cabezal Ø163 mm)	10–150 mm (0.39"~6")
04Potencia por husillo	15 & 22 kW / 20 & 30 HP
05Velocidad de husillo	6000 rpm
06Diámetro de husillo	50 mm or 1 13/16" or 2 1/8"
07Tool Cutting Circle,1st Bottom Spindle, min-max	160–260 mm (6.3"~10.25")

08Tool Cutting Circle, Vertical Spindles,min-max	160–260 mm (6.3"~10.25")
09Tool Cutting Circle, Horizontal Spindles, Top, min-max	160–260 mm (6.3"~10.25")
10Tool cutting circle, Horizontal Spindles, Bottom, min-max	160–260 mm (6.3"~10.25")
11Feed Motor - Standard	15 kW / 20 HP
12Feed Speed, infinitely variable by VFD Inverter duty Motor	8–80 m/min (25–265FPM)
13Top Feed Roller Diameter	205.36 mm (8")
14Top Feed Roller Width	3 x 50 mm (2")

01Pneumatic Pressure for feed rollers, max	6 bar (85psi)
02Adjustment range for Infeed Table and edge-jointing Fence	10 mm (0.4")
03Adjustment range for Vertical Spindles (axial)	80 mm (3.2")
04Adjustment range for Horizontal spindles (axial)	40 mm (1.6")
05Length of the Infeed Straightening Table	0.8M (32")
06Clutch Roll on 1st top Infeed Roll	Included
07Digital Readout and Quick Set to Main guide & Infeed Rolls(Btm Head Cut-table)	Included

08Quick Set Setworks on Near Side Head(s) & Top Head(s) (Radial Set)	optional
09Mechanical Digital Readouts for the Spindles, Top Head Chip Breakers	Included
10Full Sound and Safety Enclosure w/ Strobe-free Lighting	Included
11Motorized vertical adjustment of Feed Beam with Top Feed Rolls	Included
12Extra HD Chainless Cardan Shaft Feed System w/ExHD Gearboxes	Included
13Diameter of Dust Hood for Vertical Spindles	Ø200 mm (7.9")
14Diameter of Dust Hood for Horizontal Spindles	Ø230 mm (9.1")